sidactor ? protection thyristors 195 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. high surge current protection sidactor ? primary protection series - modi?ed to-220 the sidactor ? primary protection series modi?ed to-220 are thyristor devices designed for use in primary protection applications. the series provides a single port overvoltage solution that enables applications to comply with gr-974 and a range of other global regulatory standards. please contact littelfuse to discuss your particular application and regulatory requirements. description features and bene?ts t high holding current options available t failsafe option available t low voltage overshoot t low on-state voltage t does not degrade with use t fails short circuit when surged in excess of ratings t single-port protection t modi?ed to-220 package t lead forms available 1 2 3 (t) (r) (g) agency approvals agency agency file number e133083 schematic symbol pinout designation pin 1 pin 2 pin 3 applicable global standards t ( 3 t 6 - t * 5 6 , electrical characteristics part number marking v drm @l drm =5a v s @100v/s v drm @l drm =5a v s @100v/s v t @i t =2.2 a i h *i s i t capacitance @1mhz, 2v bias v min v max v min v max v max ma min ma max a max pf min pf max pins 1-2, 3-2 pins 1-3 pins 1-2, 3-2 p0602aclxx p0602ac 25 40 50 80 4 50 800 2.2 see capacitance values table p1402aclxx p1402ac 58 77 116 154 4 150 800 2.2 p1602aclxx p1602ac 65 95 130 190 4 150 800 2.2 p2202aclxx p2202ac 90 130 180 260 4 150 800 2.2 p2702aclxx p2702ac 120 160 240 320 4 150 800 2.2 P3002ACLXX p3002ac 140 180 280 360 4 150 800 2.2 p3602aclxx p3602ac 170 220 340 440 4 150 800 2.2 p4202aclxx p4202ac 190 250 380 500 4 150 800 2.2 p4802aclxx p4802ac 220 300 440 600 4 150 800 2.2 p6002aclxx p6002ac 275 350 550 700 4 150 800 2.2 notes: * higher holding current available by special order. contact littelfuse for additional information. - absolute maximum ratings measured at t a = 25oc (unless otherwise noted). - devices are bi-directional (unless otherwise noted). - xx part number suf?x: rp (reel pack), blank (bulk pack), 60 (type 60 lead form bulk pack), fs1 (failsafe option bulk pack). refer to part numbering section for additional details.
sidactor ? protection thyristors 196 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. high surge current protection capacitance values part number pin 1-2 / 3-2 tip-ground, ring-ground pin 1-3 tip-ring pf min pf max pf min pf max p0602aclxx 35 65 20 40 p1402aclxx 105 155 60 90 p1602aclxx 95 145 50 85 p2202aclxx 75 115 40 65 p2702aclxx 70 105 40 60 P3002ACLXX 65 95 35 55 p3602aclxx 65 90 35 50 p4202aclxx 60 85 35 50 p4802aclxx 60 85 30 50 p6002aclxx 55 80 30 45 note: off-state capacitance (c o ) is measured at 1 mhz with a 2 v bias. package symbol parameter value unit modi?ed to-220 t j operating junction temperature range -40 to c t s storage temperature range -65 to c r 0 ja thermal resistance: junction to ambient 60 c/w thermal considerations i h i t i s i drm v drm v t +v -v +i -i v s 50 100 0 t r t d 0 peak value half value t C time (s) i pp C peak pulse current C %i pp t r = rise time to peak value t d = decay time to half value waveform = t r x t d v-i characteristics t r x t d pulse waveform -8 -40 -20 0 20 40 60 80 100 120 140 160 -6 -4 0 2 4 6 8 10 12 14 junction temperature (t j ) C c percent of v s change C % 2 5 c 25c case temperature (t c ) - oc 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 ratio of i h i h (t c = 2 5 oc) normalized v s change vs. junction temperature normalized dc holding current vs. case temperature surge ratings series i pp i tsm 50/60 hz di/dt 0.2x310 1 0.5x700 2 2x10 1 2x10 2 8x20 1 1.2x50 2 10x160 1 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 a min a min a min a min a min a min a min a min a min a min a/s min c 50 500 400 200 150 200 175 100 200 50 500 pin 1 pin 2 pin 3 notes: 1 current wavef orm in s 2 voltage wavef orm in s - peak pulse current rating (i pp ) is repetitive and guaranteed for the life of the product. - i pp s b u j o h t b q q m j d b c m f p w f s u f n q f s b u v s f s b o h f p g ? $ u p ? $ - the device must initially be in thermal equilibrium with -40c < t j < ? $
sidactor ? protection thyristors 197 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. high surge current protection soldering parameters physical speci?cations environmental speci?cations lead material copper alloy terminal finish 100% matte-tin plated body material ul recognized epoxy meeting ?ammability classi?cation 94v-0 part numbering construction variable packing options i pp rating rohs compliant type p = sidactor p clxx median voltage package type xxx 2 a blank : bulk rp: reel pack 60: t ype 60 lead form (for type 60 orders, contact factory). construction variable failsafe option* i pp rating rohs compliant type p = sidactor p c l fs1 median voltage package type xxx 2 a * failsafe devices are only offered in bulk pack, reel pack not available. time temper ature t p t l t s(max) t s(min) 2 5 t p t l t s time to peak temperature (t 2 5 oc to peak) ramp-down ramp-up preheat critical zone t l to t p figure 1 high temp voltage blocking 80% rated v drm (v ac peak
? $ p s ? $
504 or 1008 hrs. mil-std-750 (method 1040) jedec, jesd22-a-101 temp cycling ? $ u p ? $
n j o e x f m m
v q u p cycles. mil-std-750 (method 1051) eia/jedec, jesd22-a104 biased temp & humidity 52 v dc ? $
3 )
v q u p i s t & * " jedec, jesd22-a-101 high temp storage ? $ i s t . * - 4 5 % . f u i p e
jedec, jesd22-a-101 low temp storage -65c, 1008 hrs. thermal shock ? $ u p ? $
n j o e x f m m
t f d u s b o t g f s
10 cycles. mil-std-750 (method 1056) jedec, jesd22-a-106 autoclave (pressure cooker test) ? $
3 )
b u n
v q u p i s t & * " jedec, jesd22-a-102 resistance to solder heat ? $
t f d t . * - 4 5 % . f u i p e
moisture sensitivity level 3 )
? $
i s t
s f n p x d z d m f t ? $ 1 f b l
+ & % & $ + 4 5 %
- f w f m re?ow condition pb-free assembly (see fig. 1) pre heat - temperature min (t s(min) ) ? $ - temperature max (t s(max) ) ? $ - time (min to max) (t s ) 60-180 secs. average ramp up rate (liquidus temp (t l ) to peak) 3c/sec. max. t s(max) to t l - ramp-up rate 3c/sec. max. re?ow - temperature (t l ) (liquidus) ? $ - temperature (t l ) 60-150 secs. peak temp (t p )
? $ time within 5c of actual peak temp (t p ) 30 secs. max. ramp-down rate 6c/sec. max. time 25c to peak temp (t p ) 8 min. max. do not exceed ? $ part marking xxxxx xxxxxxxxx part marking code (refer to electrical characteristics table) date code
sidactor ? protection thyristors 198 revised: february 22, 2011 ? 2011 littelfuse, inc. speci?cations are subject to change without notice. please refer to www.littelfuse.com for current information. high surge current protection dimensions - modi?ed to-220 d f p g a o tem p er at u r e measurement po i n t pin 3 pin 2 pin 1 j h l k m n the modi?ed to-220 package is designed to meet mechanical standards as set forth in jedec publication number 9 5 . inches millimeters min max min max a 0.400 0.410 10.16 10.42 d 0.360 0.375 9.14 9.53 f 0.110 0.130 2.80 3.30 g 0.540 0.575 13.71 14.61 h 0.025 0.035 0.63 0.89 j 0.195 0.205 4.95 5.21 k 0.095 0.105 2.41 2.67 l 0.060 0.075 1.52 1.90 m 0.070 0.085 1.78 2.16 n 0.018 0.024 0.46 0.61 o 0.178 0.188 4.52 4.78 p 0.290 0.310 7.37 7.87 dimensions - modi?ed to-220 type 60 with failsafe dimensions - modi?ed to-220 with failsafe tape and reel speci?cation - modi?ed to-220 1.626 (41.1 5 ) 0.720 (18.29) 0.360 (9.14) 0.240 (6.10) 0.019 (0. 5 ) 0.7 5 0 0.010 (19.0 5 0.2 5 ) 0. 5 00 (12.7) 0.100 (2. 5 4) 0.100 (2. 5 4) 14.173 (360.0) dimensions are in inches (and millimeters). 1.968 ( 5 0.0) direction of feed packing options package type description quantity added suf?x industry standard a modi?ed to-220 tape and reel pack 700 rp eia-468-b modi?ed to-220 bulk pack 500 (no added suf?x) n/a modi?ed to-220 type 60 lead form bulk pack 500 60 (special order item, contact factory for details) n/a
|
